Installing a dash cam in your car is a simple and convenient way to capture video footage of the road ahead. Whether you want to document accidents, traffic incidents, or other noteworthy events during your drive, a dash cam can be a valuable tool. In this guide, we’ll provide you with dash cam installation step-by-step information. We’ll cover everything from choosing the ideal location for your dash cam to routing the power cable and mounting the device. Additionally, we’ll share some expert dash camera installation tips to ensure a professional and tidy installation.
Here are the dash cam installation steps:
- Choose the right spot for dash cam
- Clean the Mounting Surface
- Attach the Adhesive Mount
- Mount the Dash Cam
- Adjust the Angle of the Dash Cam
- Connect the Dash Cam
1. Choose the Right Spot for Dash Cam
To ensure optimal performance, it is important to choose the right spot for your dash cam. The upper corner of your windshield, near the rearview mirror, is highly recommended. This strategic placement offers an unobstructed view of the road ahead, giving you clear and comprehensive footage.
However, if your vehicle is equipped with a sunroof, consider mounting your dash cam on the passenger side of the windshield. This positioning helps to minimize the interference caused by direct sunlight, ensuring that the lens captures high-quality video without any obstruction.
2. Clean the Mounting Surface
Once you’ve chosen a mounting location, with the help of window cleaner and a few paper towels you can clean the surface. Apply the window cleaner and use paper towels to wipe and scrub the surface. Once the surface is clean, take another dry paper towel and carefully dry the mounting surface completely.
3. Attach the Adhesive Mount
After cleaning the mounting surface, now time to attach the adhesive mount. Most of the dash cams come with an adhesive mount that is pre-cut to the correct size. You just peel off the backing paper from the adhesive mount and press it firmly in place on the mounting location.
4. Mount the Dash Cam
Now time to mount the dash cam itself. Many dash cams come with a convenient bracket that easily attaches to the adhesive mount. To install, simply slide the bracket onto the adhesive mount and securely tighten the screws.
5. Adjust the Angle of the Dash Cam
The most important part of installing the dash cam is adjusting the angle, you’ll need to adjust the angle of the lens. You’ll want the lens to be pointed slightly upwards so that it captures a good view of the road ahead.
6. Route the Power Cable
You’ll need to route the power cable from the device to the 12-volt power outlet in your car. There are two options for routing the cable: hiding it behind the dashboard or tucking it along the edge of the windshield.
7. Connect the Dash Cam
After adjusting the angle of the lens, it’s time to connect your dash cam. Simply locate the power cord that comes with most dash cams and plug it into your car’s cigarette lighter socket.
Once the power cord is securely connected, the dash cam will automatically turn on and begin recording.
Congratulations! You have now successfully installed your dash cam.
Tips for Getting the Best Results
To achieve the best possible results from your dash cam, consider the following tips:
1. Select the Best Mounting Location (for a good view)
2. Clean and Dry Surface (for a better video result)
3. Proper Lens Angle (clear view of the road)
4. Reliable Power Source (no interruptions)
5. Testing (Test dash cam before drive)
By following these how to install dash cam tips and being mindful of the installation process, you can easily set up your dash cam and start recording valuable footage with confidence.